Kite creation has been a hobby for many persons in many cultures for a number of years. Apart from flying a kite making it is a great means of exploring your individual creativeness for arts and crafts. For children who are searching for new leisurely activities to occupy their time in the holidays kite flying is ideal. Ready made kites have recently become more common and are even more so cheap. While a lot of persons decide to buy pre-arranged kites, construction effort that is used for making a brand new kite by yourself is so much more exciting. You can also make your kite in a wide variety of designs and sizes, and with a few items with these guidelines you can continue to make your own kite with these instructions.
Items needed:
Bamboo sticks
Fishing line
Strings
Plastic bags
Knife
Scissors
Ruler
The Instructions are as follows:
1. Take the razor to cut the bamboo into individual pieces. Make the longest which will function as the spine of the kite so it can be placed vertically while the smallest piece will be turned horizontal. Then use the string and connect the two pieces together at the centre where it outlines the structure of the kite however, ensure that the lengths that divide the horizontal bamboo stick is equal and use the ruler to check the measurements.
2. Use the knife to create a small incision at the last part of each bamboo stick, deep enough so that a set of strings can be placed through them. Then cut a length of string and place it through each incision of the bamboo sticks at each end so that it goes around the kite. Now stretch the chord around the kite so that it makes a loop at the apex of the kite so it can be enclosed a couple times to stabilize the frame.
3. Slice the plastic bag into pieces using the scissor, and make certain it is big enough to go over all the triangle(s) as well as its edges. Then use the glue and attach each part firmly to the edges to make sure that it folds over the string frame.
4. Take another group of strings and connect them at every end where they will be fastened together at the centre. This is the same area where the chord will be attached to fly the kite.
5. Then join another piece of string at the ending of the kite to create the tail of the kite.
Tips and Warning
* Whenever you are pasting the plastic bag over kite, you can also use spray glue to connect them at the centre to strengthen the structure.
*Whenever you fly the kite, try to stay away from areas with electrical lines that will obstruct you from flying it. Many kites end up being trapped in the wires and cannot be retrieve.
* You can use the same fundamental principles of kite building with minimal adjustments to make your own kite designs or even shapes such as squares and octagons.
* If you want to construct the kite with more strength, create the frame with a curve.
That’s all you need to know. Now you are an expert on How to make a kite by your own.
no comment untill now