How to build a tree house
A tree house is a great way to acquire extra play space for children or may even be used as an entertaining area for adults in some instances. The look of your tree house may be modified to suit either purpose. Your main goal should be to achieve durability, stability and then attractiveness. Once you utilize the proper materials your child’s cosy space to himself or your nature lover’s leisure spot may be crafted to suit your desires adequately. Once you have created your sturdy structure, you may apply a couple finishing touches to make it even more inviting. Essentially this should become an outdoor retreat that may very well last you a few decades or more if it is maintained effectively. Before building a tree house, choosing the appropriate plan and the right tree will be the first two elements you should decide on before starting this project. You will also be more successful if you acquire the assistance of a few friends. You may have great fun undertaking this project and you will certainly see your triumph in full bloom once the tree house has been completed for use.
Required Materials
Lumber
Galvanized Screws
Concrete (cement, sand and gravel)
Gravel Base
Clamp
Required Tools
Jigsaw
Hammer
Post-hole digger
Drill
Level
Instructions
1.To begin get your second frame board and position it. Then brace it for extra support. Then you will need to drop a plum bob from the board to the ground this will distinguish the area where you will place the first post hole. Create a mark at this section and then use a post-hole digger or shovel/spade if you do not have a digger and create a hole of 2 feet in depth. If you go a bit deeper that will be okay, however, be certain that enough of your post will be available to connect to your tree house structure.
2.You can now pour the gravel base into the hole; this should take up no more than 3-4 inches of the hole. Place your 4 by 4 post into the newly filled hole and utilize a post level to make certain the post is perfectly vertical. After doing this secure your post by clamping it to the frame board, this will stop it from swaying.
3.To secure your post further you will now have to put in your concrete mixture into the post hole. Put a bit of water on top of the mixture to prevent air bubbles from forming. Your post will be stable after it has dried properly. Repeat this process for the other two posts.
4.Put up the other two frame boards to complete your base structure. Put a few galvanized screws into the corners to make sure that they are secured properly.
5.Drill your posts and frames and then put in the carriage bolts properly. Put on your washer and nut and then re-enforce the two with a normal socket wrench to stop shifting. You will need to cut the tops of the posts so that they will be symmetrically in line with the top of the frame. You may use your jigsaw to get a better cut. You may use a level to ensure that your cuts are level on top.
6.Build your ladder using your two by fours. Cut them to fit the area, making both rails and rungs. Nail them or screw them in place based on the surface and your actual preference.
7.Now you are ready to lay your planks at the top of your base structure. Ensure you leave spaces in between each piece of lumber. Nail them down properly.
8.Then create your wall frames using four by fours and wall studs. Put the frames around your platform and screw them firmly in place.
9.Use a few pickets around your wall frame to giveextra stability to your structure. Re-enforce these will screws and a nail gun.
10.Your tree house is after all that ready to be painted and decorated as you like.
Tip
Before building examine the tree carefully. Have professional look at it to make sure there is no damage that you may have missed. The tree needs to be healthy and apt to support the weight of your tree house.
no comment untill now