Literatur Recherche

Mozart, as we all knew, is actually the well loved Wolfgang Amadeus Mozart who is known to be one of the most powerful, influential, and undoubtedly best composers and musicians during the classical period of music, which is the period from the 1750s up to the 1820s. When referring to his piano concertos, rightfully labeled with his name, we basically refer to the thirty concerts penned by Mozart himself. These are mainly for piano as well as for orchestra. Many of these were actually for the series of piano and orchestra concerts in Vienna, Austria during the period from the year 1784 up to 1786.

Why the Mozart Piano Concertos are Highly Celebrated

Many people refer to Mozart’s thirty piano concertos as one of the main reasons why he is currently one of the most well revered musicians of all time. These concertos have been popular topics by writers such as Arthur Hutchigs, Charles Rosen, Cuthbert Girdlestone, Dover, Eulenberg, Leeson, Norton, Tovey, and Robert Levin. Each of these authors basically gave very intelligent analyses on how they have observed Mozart work on his masterpiece and zero in his signature style of doing music. This style, especially the ones that were observed in the concerto, is still being duplicated up to this very moment, and is considered one of the highest forms of musical composition for orchestras.

Anyone who has had their gaze drawn down the soft, sinuous curves of an acoustic guitar is sure to have felt an irresistible urge to handle the magnificent instrument. It can be a challenging but worthwhile pursuit for an enthusiast to combine the knowledge of woodworking and a love of music and learn how to build a guitar.

Plans for building guitars are available from a wide variety of sources. The type of wood you select for the body of the instrument plays an important role in the sound that is generated. The wood used should be 0.25 inches thick and be durable yet lightweight. Types of wood that are commonly used include cedar and spruce.

The front and back parts, or pieces, of the guitar can be cut out with a jig saw after precise measurements are made. The two pieces have to be exactly the same shape to ensure a perfect fit. The sound hole is an integral part of the instrument that produces a sound with more bass if it’s smaller, and more treble if it’s larger. This has to be cut out near the center of the front piece.

Both the back and front pieces have to be braced for support and strength and to lower the risk of the wood cracking in drier conditions. Braces are made from similar wood and attached with wood glue. The glue must be allowed to dry before proceeding further.

Forming the sides of the instrument is a time-consuming process that requires much patience. Two strips of wood, approximately 5 inches wide and long enough to wrap halfway around the body pieces are needed. The strips have to be soaked in hot water and individually shaped to fit the contours of the pieces. A Styrofoam mold can be used to ensure the strips keep their shape. The strips are glued to end and neck blocks before the front and back pieces are glued to the sides thus forming the body.

A mortise, or groove, is cut in the top of the body where the neck is attached after the body is sanded and smoothened. The construction of the neck, bridge and fret board are laborious and it is recommended that a commercial, pre-fabricated unit is used. Attach these securely with glue and leave to dry before stringing the instrument.

Getting Lite

Getting Lite also called getting dark, lite feet or getting heavy, is a type of street dance movement presently gaining popularity in urban and street cultures, that came out of in Harlem, NY. It normally occurrs when a group of people gather and clap a variation of a clap a four count beat over and over. Dancers can then enter the circle and execute moves that are akin to Jerkin, the chicken noodle soup, and the Harlem shake.

Steps to learning Getting Lite:

It s easy and virtually anyone can do it

Non-dancers will be happy to know that while the movements of getting litre mimic those of already existing dances, they are not the actual dances. For that reason, it a whole lot easier to conceal an error or to

simply have fun getting lite when in truth you probably have no idea what it is you’re doing. Individuals who are thought to be champions at getting lite are original, so while youtube and other video blog video posts are a good place to get the basic principles, they should not be copied precisely. To put it simply, if you have seen it, at least half of the people who you would end up getting lite with would have watched it too.

Incorporate other dances:

There are various versions of the moves when it comes to facial expressions. Some people prefer to look silly; sticking out their tongues or appearing astonished when they do a move. Others will seem like they are doing the most complex thing with an utterly stern look on their faces.

Remember your feet:

A movement that is apparent in all the dancers styles is quck foot movements (hence the name lite feet), integrating hopping, jumping and crisscrossing. If you are stumped following the professional videos online where dancers will appear to looks so much better than you think you do, and you need step by step instruction figuring out getting lite, there are tutorials that can can provide a walk through. You can replay them as many times as you need until you are comfortable doing the moves. Just keep in mind, that in reality, originality is still key and there are no rules or limits to what you can do. It’s all about self expression and having fun.

Use your props

Props are also prominent in getting lite. Dancers will use hats, shirts, shoes, backpacks and jacket’s to emphasize their moves, throwing into the group of persons gathered or jumping over them

Touch the ground:

At some point, an item or the dancer getting lite will touch the ground or pick an item up off the ground. This may be hard to execute in time to the beat, but if you manage it, you’re well on your way to get lite.

Practice and have fun with it:

Get lite is about having fun, even if you check the videos on youtube, you will see the dancers stumble, and there’s nothing wrong with it. You can always step out of the circle if you’re in a group of persons or fix areas when you feel you may be awkward at home where no one can see. Anyone can learn how to do the Get Lite dance.

Kite flying can be a very relaxing past time and though ready-made kites are low-priced and easy to obtain, it can be very rewarding to build one from scratch with your own two hands. The process is very quick and easy so if you are up for it, here are a few things to get you started on a diamond-shaped kite.

How To Build A Kite

Required Tools

Markers, paint or crayons

Knife/saw

Scissors

Required Materials

String

Scotch tape or glue

1 sheet of strong paper/plastic (102cm x 102cm)

2 sticks of bamboo or wooden doweling 90cm and 100cm

Strong cord

Instructions

The first step is to build the frame of your kite. Place the 100 cm stick on a level surface and lay the 90 cm stick across it. The 90 cm stick ought to be about 2/3 up the 100 cm stick and should be even on both sides (basically you should have the shape of a cross). Keep in mind that you are making a diamond shape therefore the 90 cm stick should be higher than the middle of the 100 cm stick.

Once the sticks are lined up use the string to wrap around them and hold them in place. Use a knife/saw to cut tiny nicks into the 4 ends of the frame big enough for string to fit in without coming out. Now tie the end of the string to one of the sticks and run the string all the way around the frame. Place the string into a notch, wrap it right around the stick so it remains in place and move on. Do this on all the sticks, then tie the string and cut it with a knife or scissors.

Now take the paper/plastic and put it down and then place the frame on top of it. Use your scissors to cut the paper/plastic to equal the frame, leaving about 2 cm additional right around. If you intend to paint or color the kite, this is most likely the best opportunity to do so as it will be easier to create patterns while the paper/plastic is lying flat instead of waiting until it is wrapped around the frame.

After you are finished with your painting/coloring and the paper/plastic has dried, fold the extra paper/plastic over the strings and tape or glue them down so that they enclose the string frame, making sure that the paper/plastic is completely stretched and taut.

Tie a section of string around the top and bottom of the 90 cm stick, but leave a little of extra string hanging in the center (for example since the stick is 90 cm long, make the string about 100 cm long). Tie another section of string around the top of the 100 cm stick and around the bottom too as with the 90 cm stick however, leave additional string at the bottom for the tail (about 25 cm longer). Locate where both strings cross each other in the middle. This is where you will secure the string which you will be holding onto while the kite is in the air.

Lastly use ribbons to decorate the kite tail; apart from looking pretty the ribbons will add weight to the kite and prevent it from spinning out of control while in the air. When this step is done tie the cord you will be holding around the 2 strings mentioned earlier and your kite is ready to go.

Tips and Warnings

When running the string to make the kite’s frame, ensure that you do not pull the string so tautly that you warp the frame of the kite.

If the kite keeps dipping or spinning out of control the tail may be too light or too heavy as such experiment with it until the kite flies steadily.

Here you can find more information on how to build a kite.

A ballista is a very old type of crossbow which was used in times of combat by mainly the Greeks & Romans. The ballista works by firing heavy darts or stones to damage the enemy. Persons carry out projects on ancient societies which may require them to produce certain artifacts from the Greeks and Romans, in such cases the ballista may be necessary for a staging. These items can also be used within screenplays and videos that display ancient times while for others this feet may just be to open up a creative enlightenment by trying their hand at creating objects that symbolize antiquity. You can construct a ballista by paying for a ballista-making package but it is much more gratifying to construct one by yourself from scratch with all the materials and equipment. This will allow you to exercise on your creativity and also reenact an instance of the early days of warfare.

How To Build A Ballista

Required Tools:

Hammer

Measuring tape

Required Materials:

Thin rope

Piece of strong nylon

Nails

2 washers

2 hoop hooks

Wooden block 12” high and 12” wide, 24” long; the base

Block of wood 3”x3”x12”

Block of wood 2” x 2” x 24”

2 blocks of wood 2” x ¼’’ x 12”

2 – 2” cubes of wood

1 length of wood about the same size as a standard pencil

2 wooden cylinders approximately 2” diameter and 2” long

2 – 2” long poles made of metal

Instructions are as follows:

1. Initially you have to assemble the bottom section of the ballista. Put it onto the work surface and align the 3 inch piece of wood to the 12 inch edge of the base and connect the two pieces of wood together with the nail and hammer.

2. Now arrange the block so that it is resting with the 3 inch block on the base then use the nail to connect the 2’x24” piece of wood to the top middle section of the base.

3. Use the hammer and nail to fasten the first 2”x12” piece of wood to the 24 inch piece so that both pieces create a T.

4. Place your 2 cubes of wood between the horizontal wood of the T-shaped design. These pieces should be nailed about three inches from where the two pieces connect.

5. Put the left over 2”x12” piece of wood atop of these cubes. Drive a single nail into this wood, then through the blocks, then into the first 2”x12” piece.

6. Put the two wooden cylinders on either side of the horizontal ends of the T shape.

7. Put a washer on each end of the horizontal bar of the T, around 3 inches away from each end. Nail them in place.

8. Join a hoop hook between your wooden cube and the wooden cylinder on the inside section of the horizontal bar of the T. then Insert the rope into each hook, and begin to twist the rope. When you have entwined it halfway up the length of the rope, wind the pencil-like section of wood into the rope, then tighten it securely around the wood.

9. Place the rope through the wood and through the washer. Put your metal pole atop the hole in the washer so that it settles in a horizontal plane. Tie the ropes and lock them to the poles and cut off the remaining ends of the rope. Tie each of the ends of the nylon or rubber to the pencil-like piece of wood.

Tips and Warnings

* If you are deciding to use the ballista only do it in a well open area, and by no means inside. Make sure that there are no persons or creatures near by.

* Experiment with different objects to see which goes the farthest or produces the most impact.

Read here for more information on how to build a ballista